Old Town Kayak Minn Kota, AutoPilot and Sportsman Front Seat Riser System

Made for the Old Town Minn Kota, AutoPilot and Sportsman (paddle) models, these spacers let you easily find the right height for your comfort.  The combination of the spacers with the OEM seat mount make it super easy to change heights.  

Please watch the included video that goes over this system.  We are currently limited at 1" height due to hardware availability but you can use non-stainless hardware achieve higher seat placement.  However, typically 1" or so is adequate for most people for a front riser.

NOTE:  The front risers use #10-32 which is a different thread pattern from the rear seat risers.

Hardware that comes with each system will only work for the system height ordered.  However, these use somewhat common #10-32 stainless hardware.  Most hardware stores have hardware in this thread pattern but it may not be available stainless.  If you would like an assortment of hardware with your order, please contact us.

***If you would like additional hardware to try out different seat heights, we have added extra screw sets.  These are completely optional as the risers/spacers come with the necessary hardware for the height chosen***

Each set includes:

• 1/2" System - Pair of spacers and hardware to set up at a 1/2" height.
• 1" System - Four spacers and hardware to set up at a 1" height.
• Spacers Only - One pair of spacers only.  No other hardware or risers included.
• Extra 1/2" Screw Set - Set of 4 specialty screws to set the risers at 1/2" high
• Extra 1" Screw Set - Set of 4 specialty screws to set the risers at 1" high

Spacers are laser cut out of hardwood.  The tops and bottoms will be unfinished wood while the edges will be charred and sealed from the laser cutting process.