Bradget Designs
Old Town Kayak Minn Kota, AutoPilot & Sportsman (Paddle) Rear Seat Riser System
Old Town Kayak Minn Kota, AutoPilot & Sportsman (Paddle) Rear Seat Riser System
Couldn't load pickup availability
We now have 1/2" and 1" plastic spacers available!
Please Note: If you install risers taller than 2.25", you will most likely need to modify the straps that hold down the seat. Please see the video on this page for more information.
Made for the Old Town Sportsman (paddle), Minn Kota and AutoPilot models, this system lets you easily find the right riser height for your comfort. The combination of the seat riser, with built in ~3/4" rise and 1/2" wood or plastic spacers makes it super easy to change heights.
If you purchase/have purchased wood spacers to test heights and would like to upgrade to plastic spacers, please reach out to us for a credit on the wood spacers that you can apply to the purchase of plastic spacers.
Please watch the included video that goes over this system. We are currently limited at 3.25" height due to hardware availability but you can use non-stainless hardware as shown in the video to go higher than 3.25".
Hardware that comes with each system will only work for the system height ordered. However, these use very common #10-24 stainless hardware so it is very easy to pick up different length screws at the hardware store. If you would like an assortment of hardware with your order, please contact us.
If you would like additional hardware to try out different seat heights, we have added extra screw sets. These are completely optional as the risers/spacers come with the necessary hardware for the height chosen
Each set includes:
- DIY - Pair of plastic seat risers with built in 1/2"+ rise and 4 screws to allow you to attach them to any block of wood or other spacer you choose.
- 1.25" System - Pair of risers, two spacers and hardware to set up at a 1.25" height.
- 1.75" System - Pair of risers, two spacers and hardware to set up at a 1.75" height.
- 2.25" System - Pair of risers, six spacers and hardware to set up at a 2.25" height.
- 2.75" System - Pair of risers, eight spacers and hardware to set up at a 2.75" height.
- 3.25" System - Pair of risers, eight spacers and hardware to set up at a 3.25" height.
- 1/2" Spacers Only - Wood or Plastic - One pair of spacers only. No other hardware or risers included.
- 1" Spacers Only - Plastic Only - One pair of spacers only. No other hardware or risers included.
- Extra 1.25" Screw Set - Includes 4 stainless machine screws only to setup at 1.25" height.
- Extra 1.75" Screw Set - Includes 4 stainless machine screws only to setup at 1.75" height.
- Extra 2.25" Screw Set - Includes 4 stainless machine screws only to setup at 2.25" height.
- Extra 2.75" Screw Set - Includes 4 stainless machine screws only to setup at 2.75" height.
- Extra 3.25" Screw Set - Includes 4 stainless machine screws only to setup at 3.25" height.
PDL version has two holes that can use bungee cord, cordage, zipties or other securement options (not included) to secure the risers to the seat if you desire.
Spacers are laser cut out of hardwood. The tops and bottoms will be unfinished wood while the edges will be charred and sealed from the laser cutting process.
Share


















